View HSMX-S660_919917.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

High Performance Surface Mount Chip LEDs Technical Data
SunPower Series
HSMX-S660 Series HSMx-S670 Series HSMx-S690 Series
Features
* High Brightness AlInGaP Material * Industry Standard 2.00 x 1.25 mm Package * Industry Standard 1.6 x 0.8 mm (Low Profile) Package * Right Angle Package * Three Colors Available * Diffused Optics * Compatible with IR Solder Process * Available in 8 mm Tape on 7" (178 mm) Diameter Reels
Description
These chip-type LEDs utilize aluminum indium gallium phosphide (AlInGaP) material technology. The AlInGaP material has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. The 590 nm amber, 605 nm orange, and 626 nm red colors are available in three compact, low profile packages. The HSMx-S670 is the industry standard 2.0 x 1.25 mm package, and is an excellent all around package. The HSMx-S690 is the industry standard 1.6 x 0.8 mm package. Its low 0.7 mm profile and wide viewing angle make this LED excellent for backlighting applications. The HSMX-S660 right angle, 3.0 x 2.0 x 1.0 mm LED is optimum for side lighting applications where direct backlighting is not practical. All packages are compatible with IR and convective reflow soldering processes.
Applications
* Keypad Backlighting * LCD Backlighting * Symbol Backlighting * Front Panel Indicator
Device Selection Guide
Footprint (mm) [1][2] 1.6 x 0.8 x 0.7 2.0 x 1.25 x 0.8 3.0 x 2.0 x 1.0 Amber 590 nm HSMA-S690 HSMA-S670 HSMA-S660 Orange 605 nm HSMD-S690 HSMD-S670 HSMD-S660 Red 626 nm HSMC-S690 HSMC-S670 HSMC-S660
Notes: 1. Dimensions in mm. 2. Tolerance 0.1 mm unless otherwise noted.
2
Package Dimensions
1.25 0.1 0.8 +0.05 0.3 0.40 (0.13) 2.0 1 CATHODE MARK 1.3 1.2 3 0.40 POLARITY MARK
1 CATHODE MARK 2 3 CATHODE POLARITY MARK 1.6 (0.28) 1.2 1.1 0.35
ANODE
0.8
0.7 0.2 0.35
ANODE
2
CATHODE
HSMx-S670 Series
3.0 1
HSMx-S690 Series
1.0 0.3 FRONT VIEW R0.8 2.0 0.3
2
2.0 3 TOP VIEW 1.0
0.25 (0.88) CATHODE
0.25
ANODE
PIN CONNECTION MARK
R0.45 TO REINFORCE SOLDERING (NON-PIN CONNECTION) REAR VIEW
Notes: 1. Dimensions are in millimeters (inches). 2. Tolerance, unless otherwise specified, 0.1 mm ( 0.004 inch).
HSMX-S660 Series
Absolute Maximum Ratings at TA = 25C
Parameter DC Forward Current [1][2][3][4] Power Dissipation Reverse Voltage (IR = 100 A) Operating Temperature Range Storage Temperature Range HSMX-S660 30 81 5 -40 to +85 -40 to +100 HSMx-S670 30 81 5 -40 to +85 -40 to +100 HSMx-S690 30 81 5 -40 to +85 -40 to +100 Units mA mW V C C
Notes: 1. Derate linearly as shown in Figure 4. 2. Drive currents between 1 mA and 30 mA are recommended for best long term performance. 3. Operating at currents below 1 mA is not recommended. Please contact your Agilent representative for further information. 4. Maximum temperature for tape and reel packaging is 60C.
3
Optical Characteristics at TA = 25C
Luminous Intensity IV (mcd) @ IF = 20 mA[1] Min. Typ. 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 16.0 65.0 65.0 65.0 65.0 65.0 65.0 50.0 50.0 50.0 Peak Wavelength peak (nm) Typ. 592 592 592 609 609 609 630 630 630 Color, Dominant Wavelength d[2] (nm) Typ. 590 590 590 605 605 605 626 626 626 Viewing Luminous Angle 21/2 Efficacy Degrees [3] V Typ. (lm/W) 155 165 165 155 165 165 155 165 165 480 480 480 370 370 370 197 197 197
Part Number HSMA-S660 HSMA-S670 HSMA-S690 HSMD-S660 HSMD-S670 HSMD-S690 HSMC-S660 HSMC-S670 HSMC-S690
Color Amber Amber Amber Orange Orange Orange Red Red Red
Notes: 1. The luminous intensity IV is measured at the peak of the spatial radiation pattern which may not be aligned with the mechanical axis of the lamp package. 2. The dominate wavelength d is derived from the CIE Chromaticity Diagram and represents the perceived color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity.
Electrical Characteristics at TA = 25C
Forward Voltage V F (Volts) @ I F = 20 mA Typ. Max. 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 1.9 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 2.4 Reverse Breakdown VR (Volts) @ IR = 100 A Min. 5 5 5 5 5 5 5 5 5 Thermal Resistance RJ-PIN (C/W) 600 300 300 600 300 300 600 300 300
Part Number HSMA-S660 HSMA-S670 HSMA-S690 HSMD-S660 HSMD-S670 HSMD-S690 HSMC-S660 HSMC-S670 HSMC-S690
Color Amber Amber Amber Orange Orange Orange Red Red Red
Capacitance C (pF), VF = 0, f = 1 MHz Typ. 45 45 45 45 45 45 45 45 45
4
Yellow/Amber Color Bins[1]
Bin ID A B C D E F
Tolerance: 0.5 nm.
Dom. Wavelength (nm) Min. Max. 582.0 584.5 584.5 587.0 587.0 589.5 589.5 592.0 592.0 594.5 594.5 597.0
Orange Color Bins[1]
Bin ID A B C D E F
Tolerance: 1 nm.
Dom. Wavelength (nm) Min. Max. 597.0 600.0 600.0 603.0 603.0 606.0 606.0 609.0 609.0 612.0 612.0 615.0
Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representative for information on currently available bins.
5
Light Intensity (Iv) Bin Limits[1]
Intensity (mcd) Bin ID A B C D E F G H J K L M N P Q R S T U V W X Y
Tolerance 15% Note: 1. Bin categories are established for classification of products. Products may not be available in all bin categories. Please contact your Agilent representative for information on currently available bins.
Min. 0.11 0.18 0.29 0.45 0.72 1.10 1.80 2.80 4.50 7.20 11.20 18.00 28.50 45.00 71.50 112.50 180.00 285.00 450.00 715.00 1125.00 1800.00 2850.00
Max. 0.18 0.29 0.45 0.72 1.10 1.80 2.80 4.50 7.20 11.20 18.00 28.50 45.00 71.50 112.50 180.00 285.00 450.00 715.00 1125.00 1800.00 2850.00 4500.00
6
1.0
AMBER
ORANGE RED
RELATIVE INTENSITY
0.5
0 550
594 600 607
630
650
700
WAVELENGTH - nm
Figure 1. Relative Intensity vs. Wavelength.
IF - FORWARD CURRENT - mA
100 50 20 10 5 2 1 0.5 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5
VF - FORWARD VOLTAGE - V
Figure 2. Forward Current vs. Forward Voltage.
2.5
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
IF MAX. - MAXIMUM FORWARD CURRENT - mA
35 30 25 20 RJ-A = 600 C/W 15 RJ-A = 500 C/W 10 5 0 0 20 40 60 80 100
2.0
1.5
1.0
0.5
0
0
10
20
30
40
50
IF - DC FORWARD CURRENT - mA
TA - AMBIENT TEMPERATURE - C
Figure 3. Relative Luminous Intensity vs. Forward Current.
Figure 4. Maximum Forward Current vs. Ambient Temperature.
7
20 30 40 50
10
0 1.0 0.8
NORMALIZED INTENSITY
0.6 60 70 80 90 0.4
0.2
10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES
Figure 5. Relative Luminous Intensity vs. Angular Displacement for HSMX-S660.
1.0 0.9
NORMALIZED INTENSITY
0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -100-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES
Figure 6. Relative Luminous Intensity vs. Angular Displacement for HSMx-S670.
1.0 0.9
NORMALIZED INTENSITY
0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 -100-90 -80 -70 -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES
Figure 7. Relative Luminous Intensity vs. Angular Displacement for HSMx-S690.
8
0.9 0.2
2.4 0.8 0.8 HSMX-S690 SERIES
5.0 2.0
0.9
RWS CENTER 3.4 1.5 MOUNTING EXAMPLE 1.1 1.3
EMITTED DIRECTION
HSMX-S670 SERIES
HSMX-S660 SERIES
Figure 8. Recommended Solder Patterns.
10 to 20 SEC. 217 C
TEMPERATURE
255 C (+5/-0) 3 C/SEC. MAX. 6 C/SEC. MAX.
140 - 160 C
MAX. 120 SEC.
60 to 150 SEC.
TIME * THE TIME FROM 25 C TO PEAK TEMPERATURE = 6 MINUTES MAX.
Figure 9. Recommended Pb-Free IR Reflow Profile.
9
180 O (7.08) 21.0 (0.83) 2.0 (0.08) 60.0 O (2.36) O 13.0 (0.51) LABEL
USER FEED DIRECTION
CATHODE SIDE
60
60
1.5 TYP. (0.06)
13.0 (0.51) 10.0 (0.39)
PRINTED LABEL
NOTE: ALL DIMENSIONS IN MILLIMETERS (INCHES).
Figure 10. Reeling Orientation.
Figure 11. Reel Dimensions.
4.00 0.10 (0.157 0.004)
1.50 + 0.10 0 O (0.059 + 0.004) 0
CATHODE
1.30 0.10 (0.051 0.004) 0.20 0.05 (0.008 0.002)
1.75 0.10 (0.069 0.004) 3.50 0.05 (0.138 0.002) DIM. A (SEE TABLE 1) 8.00 0.30 (0.315 0.012)
CATHODE HOLE FOR HSMX-S690 SERIES
DIM. B (SEE TABLE 1) 2.00 0.05 (0.079 0.002)
USER FEED DIRECTION 4.00 0.10 (0.157 0.004) TABLE 1 DIMENSIONS IN MILLIMETERS (INCHES) PART NUMBER DIM. A DIM. B 0.10 (0.004) 0.10 (0.004)
CARRIER TAPE COVER TAPE
HSMX-S670 SERIES 2.25 (0.089) 1.45 (0.057) HSMX-S690 SERIES 1.85 (0.073) 1.00 (0.039)
Figure 12. Tape Dimensions HSMx-S670, HSMx-S690.
10
4.00 0.10 (0.157 0.004)
1.50 + 0.10 0 O (0.059 + 0.004) 0
CATHODE
1.20 2.0
1.75 0.10 (0.069 0.004) 3.50 0.05 (0.138 0.002) 3.35 (0.15) 8.00 0.30 (0.315 0.012) CATHODE HOLE
2.3 (0.08) (O1.1) CATHODE HOLE 4.00 0.10 (0.157 0.004)
USER FEED DIRECTION
2.00 0.05 (0.079 0.002)
Figure 13. Tape Dimensions HSMX-S660.
END
START
THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE.
MOUNTED WITH COMPONENTS
THERE SHALL BE A MINIMUM OF 40 mm (1.57 INCH) OF EMPTY COMPONENT POCKETS SEALED WITH COVER TAPE.
150 mm-360 mm (5.9 - 14.2 INCH) MAY CONSIST OF CARRIER AND/OR COVER TAPE.
Figure 14. Tape Leader and Trailer Dimensions.
Storage Condition: 5 to 30 C @ 60% RH max. Baking is required under the condition: a) the blue silica gel indicator becoming white/transparent color b) the pack has been opened for more than 1 week Baking recommended condition: 60 +/- 5C for 20 hours.
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2003 Agilent Technologies, Inc. Obsoletes 5988-7964EN October 2, 2003 5989-0164EN

▲Up To Search▲

Price & Availability of HSMX-S660

	To Download HSMX-S660 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .